One of the many features that stand out about Alaskan Malamute, is their exceptional coat. For a coat so amazing, brushing is a must, but with many options available it’s easy to get confused. This is the ultimate brush guide with everything you need to know.
The Alaskan Malamute is considered a natural breed. Natural breeds are known for their impressive self-cleaning qualities. This helps to keep their coats healthy and odor-free. But despite this ability to self-clean, regular brushing is still very important and cannot be overlooked.
Below I will cover the best brushes for a Alaskan Malamute and what other dog owners have to say about them. I’ll also cover the benefits and importance of regular brushing, as well as many grooming tips.
The rake brush is a must for all dogs boasting double-layer coats, especially Alaskan Malamute. This is a heavy-duty solid comb brush, usually with one single row of strong, long pins. This brush is designed to reach deep through your dog’s topcoat to the undercoat near the skin. Its job is to rake out the loose dead hairs close to the skin. These strong rake brushes are sometimes a little sharp so they are designed to be used with minimal pressure to avoid damaging the skin. When buying a rake brush, ideally, the length of the pin should equal the length of your dog’s coat.
Deshedding tools work well, but must be used with caution. They can sometimes be quite sharp, and if used incorrectly could damage the coat of your Alaskan Malamute. This isn’t to say that are bad brushes, but they need to be used correctly. These sharp brushes are designed to remove as much dead fur as possible. Hence being named de-shedders.
Pin brushes are alike to brushes that we commonly use for our hair. These brushes are made up of thin wires with a small oval pinhead on the top. Pin brushes are usually very comfortable for dogs and do not irritate their skin. Although these are pleasant to use for you and your dog, they don’t actually help much. They will pick up a small amount of loose hair but not as much compared to a rake or shedding brush. Pin brushes are good to finish off your previous grooming attempts and they’ll pick up the last few stragglers and leave your dog with a nice even, smooth coat.
Slicker brushes look similar to pin brushes. The slicker brush has thin, short, flexible wires that are primarily used to detangle or de-mat your dog’s coat. These brushes are also good for removing debris and loose dirt found on your dog’s topcoat or outer hairs. Due to the short wires, these brushes do not penetrate deep into the coat, making it a more comfortable experience for most dogs.
Alaskan Malamute have a thick double-layered coat that typically sheds twice per year, usually before big seasonal changes where the temperature changes significantly. It depends where you live but your Alaskan Malamute may only shed once per year, depending on the climate.
Alaskan Malamute have double-layered coats, which means they have a topcoat and an undercoat.
The topcoat is the thick coarse hair which is on the outer layer, this hair doesn’t shed and is responsible for proving outer protection against the suns UV rays, bugs, and dirt.
The undercoat is the softer fluffy hair that sits close to the skin. The undercoat is the coat that sheds to help regulate your Alaskan Malamute’s body temperature through the seasonal changes
Proper grooming is essential for Alaskan Malamute and all double-coated dogs. Without proper brushing and grooming your dog’s coat can mat and get tangled, meaning a long tedious shedding period that’s annoying for them and for you.
Equipping yourself with good brushes is absolutely necessary to keep your fluffy friend happy and healthy.
So now you know the different types of brushes, you’re likely wondering what kind of dog brush is best for shedding?
Well, a lot of people assume a de-shedding tool is the best but this isn’t always the case…
A high-quality undercoat grooming rake is the best hair removal brush for your Alaskan Malamute. The next best brush for a Alaskan Malamute is a good slicker brush for grooming the topcoat.
Our recommendation is to arm yourself with two different brushes, one primarily for hair removal and another one for topcoat grooming and dematting.
This is My Happy Alaskan Malamute’s recommended choice for removing dead hair. This is a strong, durable single row rake. It has strong long stainless steel pins which can reach further than a lot of other commercial rake brushes.
The pins are rounded and smoothed out to avoid irritating the skin of your Alaskan Malamute or dog.
Rake brushes are ideal for reaching down further than the topcoat to pull out the dead hair from the undercoat.
I urge you to check out the reviews on Amazon. With over 1300 positive reviews and a reasonable price tag, it’s hard to go wrong. Check out the brush here (Amazon)
Our second recommendation is the Hertzko Self Cleaning brush which is the perfect choice to supplement the undercoat rake.
While the Slicker brush is great at untangling and getting rid of surface debris, it likely won’t remove much of the dead hair from the undercoat. The wires are not penetrating deep enough.
This nice design features a cleaning button that pushes out all of the dog hair and debris.
The slicker brush is great at detangling and de-matting your dog’s coat, which is the primary function of this style of brush.
This brush has over 15,000 positive reviews on Amazon. It’s a tried and tested favorite. You can check the brush out here (Amazon)
The Pat Your Pet Grooming Tool is one of the most highly recommended brushes on the market.
This awesome brush has double sides, one side acts like a de-shedding brush, and the other side is a basic rake. The best two types of brushes in one!
One thing that people particularly love about this brush is its skin-friendly coming blades. All the blades are rounded and smooth which avoids irritating your Alaskan Malamute’s skin.
As well as having thousands of positive reviews on Amazon, this brush is also recommended by professional veterinarians. Check out the latest reviews on Amazon.com here
The world-famous FURminator easily takes first place for the best Deshedder Brush for a Alaskan Malamute, or any long-haired dog.
This brush was actually designed by a professional groomer. You’re in good hands.
When used correctly and part of a regular grooming routine, this great tool can remove up to 90% of the dead hair trapped in the undercoat of your dog.
Like most de-shedding tools, it has what they like to call the FURejector which is a push-down button that removes the dead hair from the brush. A very handy feature that will save you a fair amount of time.
Check out over 5000 positive reviews on Amazon.com here
A simple favorite amongst many dog owners is the Safari shedding comb. This awesome comb is minimalistic and strong.
Despite it looking like a simple rack, it is cleverly designed to have two layers of teeth, one short and one long. This effectively makes a comb that will groom both topcoat and undercoat
The longer teeth that extend down are widely spaced out, making this an effective detangling comb. Perfect for Alaskan Malamute with long hair that tangles and mats easily
The Pet Neat Deshedding Tool is very similar to the FURminator de-shedding tool mentioned above. Perhaps the only differences are a lower price and a less well-known brand.
This highly reviewed de-shedding tool features the classic thinly spaced pins for maximum dead-hair removal as well as a removable head to make cleaning very easy.
The way the head removes is uncommon to other de-shedding tools and for many people, it’s better than having the button push down mechanism to remove the hair like the FURminator.
Overall this is a great, cheaper alternative to the FURminator de-shedding tool. You can see what other dog owners have said about this exact product on Amazon.com by clicking here (link opens Amazon product page)
The Rubold Grooming Tool is perfect for demating, although due to its design it’s actually good as an all-round brush.
It features one side of 17 teeth smoothed edge teeth that perform the necessary tasks like de-shedding and dead hair removal.
On the other side, it has 9 widely spaced teeth that effectively de-mat and de-tangle your Alaskan Malamute coat.
This has over 1000 positive reviews on Amazon.com You can check out what other people have said about this exact brush here
This brush is another favorite for many dog owners with long-haired dogs. Although this brush isn’t designed to rake out all dead hairs. It does a good job of evening out your dog’s coat.
This brush is a great option to finish off after you have used a de-shedding tool or undercoat rake.
The stronger pins will smooth out your Alaskan Malamute’s topcoat and give a nice even finish to the coat. The soft plastic bristles will help to evenly spread out natural oils that cover the topcoat.
This type of brush delivers a pleasurable grooming experience for your Alaskan Malamute, and many dogs find this very therapeutic.
It currently has over 500 positive reviews. You can check out the Go Pets Pin Bristle Brush on Amazon.com
Of course, another de-shedding tool is on the list of best brushes for a Alaskan Malamute. This de-shedding tool by Happy Dogz is particularly great for large dogs because it has an ultra-wide width of 4 inches. Most brushes are 3-3.5 inches so this definitely covers more surface area in less time.
This is a well-built brush with a head that detaches for easy cleaning. Again, this detaching style is preferred over the push-down button due to fewer complications and malfunctions.
The teeth are small and close together, which is the default for all good de-shedding tools.
This is one of the highly recommended de-shedding tools available on Amazon.com Check out what other dog owners have said about this exact brush Reviews Section
CONS
The Paws Pamper Dual-Use Undercoat Rake is certainly a professional rake with a great design. This particular rake has varied teeth for extra functionality
This brush has multiple variations, the best variation for heavy double-coated breeds being the 19 blade/9 blade option. The 19 blades serve as a hair removal tool and the 9 wider spaces blades act as a detangler/demating tool.
One other thing about this brush is its superior build quality. Something that is often overlooked when getting a brush is durability and strength. This brush is made from stainless steel and solid wood
Check out the amazon reviews section and see what other dog owners have said about this impressive brush
This is a great brush for an all-round grooming session. This brush comes with two different brush heads, each brush head has two sides, meaning a total of 4 different brushes are combined in one.
With the Friends Forever Brush, you get a de-shedding tool, a dematting tool, a bristle brush, and a pin brush. Simply switch out the brush head or turn it over to perform a different task.
The de-shedding tool has 17 teeth and the dematting tool has 9 teeth. Both of which are strong and durable.
Check out the amazing reviews on the Amazon.com reviews section
This is an awesome slicker brush featuring extra long pins to reach further down into long-haired coats
Although this is usually for the topcoat, due to the extra-long pins, this brush is also capable of some hair removal.
Primarily, though, this is ideal for topcoat grooming and removing loose debris from the coat.
This is perhaps the best slicker brush on the market so be sure to check out some of the review section on Amazon
Related: Best Harnesses For Alaskan Malamute
Despite there being many great brushes on the market, the FURminator Undercoat Grooming Rake and the Hertzko Self Cleaning Slicker Brush are our winners!
My Happy Alaskan Malamute recommends arming yourself with these two brushes for a solid grooming routine.
The FURminator undercoat rake is a well-made, highly reviewed, trusted, and tested brush that will serve you best for removing dead undercoat hair.
The Hertzko self-cleaning slicker brush is a true winner with over 15,000 positive reviews on Amazon! This slicker brush works well for long-haired dogs, easily removing debris from the topcoat and will leave a soft smooth finish.
Here are 10 important tips that may help you with your grooming routine. Some of the tips are more obvious and some are less obvious! Let’s take a look at them.
Despite there being many great tools to detangle and dematt your Alaskan Malamute’s coat, it’s so much better to avoid it in the first place! The more regularly you check, the easier it will be to stop any would-be tangles before they get worse. Detangling sessions are usually quite uncomfortable for any dog.
A lot of people think that brushing against the direction of the coat will rake out more dead hair, however, this is not true. Going against the coat won’t enhance grooming, all it will do is provide discomfort to your Alaskan Malamute and potentially tangle the coat.
Grooming time should be a pleasurable experience for your dog and for you also. It’s very common to hear “my dog doesn’t stay still!” Try to choose a good time to groom your dog, preferrable after exercise, when they’re tired and never around meal times. By doing this you are increasing your chances of a calm, more receptive Alaskan Malamute while grooming. If you can make it so they like it, your grooming routine will be a breeze.
This one sounds obvious but always remember what brush you are using and what purpose it serves. It’s all too easy to forget that you’re using a pin brush and all of a sudden find yourself trying to de-shed your Alaskan Malamute…that will not work! Likewise, don’t use a rake if you’re trying to remove debris from the top coat (although it may work to some extent, a rake is not for this job)
For some brushes with shorter teeth, it’s very unlikely that you will cause any pain or discomfort to your Alaskan Malamute, however, with longer teeth you need to be more careful how much pressure you’re applying. Even if the teeth are rounded and smooth.
This goes especially for slicker brushes and pin brushes. Slicker and pin brushes have metal wires with small balls on the end to protect the harsh metal wire from scraping the skin. If the smooth ball comes off from any of the wires, this may cause scratches and discomfort or your Alaskan Malamute
A good bath before you start grooming can help loosen and remove excess hairs before you even hold a brush. However, just make sure that your Alaskan Malamute’s coat is completely dry before you start brushing.
If you do not have a solid grooming routine in place your Alaskan Malamute’s coat can matt pretty quickly. This is super important when it comes to the winter months as matting on the topcoat can ruin the insulating properties of the undercoat. Professionals recommend grooming once per week.
Whenever you start brushing your Alaskan Malamute, it’s good practice to start from the head and work your way down throughout the body ending at the tail. This will make each grooming session more efficient and productive.
Always make a fuss and give them a small treat throughout brushing and at the end. By doing this you are teaching them that brushing is a good thing and that they’re doing what they’re supposed to be doing… allowing you to brush!